We're excited to announce the following improvements to the BlockEQ wallets since winning an honourable mention in the last build challenge: Update: The first version of our iOS app has been published in the App Store making it the first private Stellar Wallet available. We will be publishing an updated version with SDEX trading and support for Stellar tokens shortly. New Features: 1. SDEX Trading Select your trading pair and view the order book that displays the top 5 buy and sell offers. Submit trades at the best market rate or submit an offer at your desired rate. In the Market view, you can enter the amount of the asset you want to offer and you're shown how much of the other asset you would receive. You can also switch from market order to a limit order to submit an offer. You can easily view and cancel your open orders as well as view your trade history. Note: Market rate swaps are temporarily limited to the amount available at the best rate. Any amount offered above this threshold will be posted as an offer (which you can wait for it to be fulfilled or you can cancel the offer in the open order section). 2. Add & Remove Stellar Assets By entering the asset's code (ex: PTS) and issuer address (ex: GBPG7KRYC3PTKHBXQGRD3GMZ5DB4C3D553ZN2ZLH57LBAQIULVY46Z5F) you can add trust lines to your favourite Stellar tokens. You can also remove the trust line as long as the balance is zero. 3. Join Inflation Pool Easily join the Lumenaut.net 0% fee inflation pool to receive your weekly distribution of Stellar's 1% annual inflation and transaction fee pool. 4. Balance Summary By default we display your available balance which is your total balance minus your trustlines (0.5 XLM each), open trade offers (0.5 XLM each), and your minimum balance (0.5 XLM). You can see how this balance is calculated in your XLM Wallet's Balance Summary (arrow next to XLM). 5. Exchange Address Recognition We have compiled a list of 21 exchanges that list Stellar Lumens (XLM) and identified whether they require Memo Text or Memo ID. When a user enters one of these exchange's address, either the Memo ID or Memo Text field becomes required depending on which Memo type the exchange uses. 6. Dual Memo Field Since exchange addresses were the primary use case of Memo's, we made a dual purpose memo field which recognizes whether you are entering a Memo ID or Memo Text field. When you enter only numbers it will be sent as a Memo ID, when you send with alphanumeric characters (letters and numbers) it will be a Memo Text. 7. PIN Settings (iOS only) Toggle PIN settings on/off for 3 main actions: launching the app, sending, and trading. 8. Security Feature: Anti-Screen Shot (Desktop only) Helps to prevent users from taking a screenshot of their 24 word recovery phrase. We encourage users to write down their recovery phrase and store it in a safe place. Anyone with access to your phrase will be able to spend your funds. Upcoming Initiatives: - Full Anchor Services via Web Portal (CAD, BTC, ETH, LTC... and many more coming soon!) - BlockPoints (PTS) Airdrop to early adopters - Android Wallet We appreciate your feedback in our mission to make the best wallets available. Download your BlockEQ Wallet today at: https://www.blockeq.com/

Looks like a nice and clean wallet. I will definitely try it out. Regarding security features, would you be interested in supporting accounts that are protected with StellarGuard multisig? It would be as simple as checking if a given signer exists on the account and then calling a REST api. See https://stellarguard.me/faq#wallet-developers for more details or check out the JS SDK ( https://github.com/stellarguard/stellarguard-js-sdk ). If so, I'll be sure to add you to the list of supported wallets: https://stellarguard.me/supported-wallets (next release of Foxlet will also have full support). Thanks!

Thank you StellarGuard! We will take a look and reach out if we have any questions. Let us know if you have any feedback on our wallets.

Congrats on getting your app through the App Store process! I took a look. Good start, ambitious list with nice ideas I’d not considered before, such as the exchange special handling. Also want to give special thanks for supporting the different size classes / screens from the beginning. It’s good to see the screen being used properly on a tablet vs it looking like a phone app. Just a couple notes about what I’d also be looking for for a wallet that I’ve not really seen in any mobile local storage only wallet. I’d want to be able to import wallets from secret keys, not just the mnemonic. The phrase option is great, but you don’t always have that for accounts you may want to import. I’d love to have a wallet support multiple fully independent accounts (HD multiaccount keys are cool, but what I really want is also the option to import multiple accounts by each of their unrelated secret keys) I want a send/receive process that doesn’t make me go through login multiple times with multiple 2fa entries (I’m looking at you Lobstr - make it an option. Face/Touch ID and/or pin/pw on launch as an option is great, and if not on launch, one check on send but not multiple. The other features of Lobstr and Lumenette are great too, but I’d assume that they are mostly already on your list.

tattwamasi Have you tried https://interstellar.exchange . Our wallet and sdex currently supports all the features you requested: 1: Support for multiple independent stellar accounts. 2. Send receive without multiple 2FA. PS: we do have an iOS app, but it hasn’t been approved by Apple yet.

BlockEQ Wallet with SDEX Trading - Build Challenge Update

tattwamasi

Interstellar is excellent and fully deserves the mentions it got from the SBC! Thanks for mentioning it. It is one of my main go to’s in terms of web and sdex. I haven’t been able to try out the iOS version yet though. Am hopeful to see the floodgates open now that at least one Stellar wallet made it through.

blockeq

Thank you tattwamasi for the feedback!

We are concerned with letting the average user import their secret key as the attack surface becomes very large. By copying and pasting their secret key the user becomes vulnerable to clipboard attacks and we also have no control over the security of third parties that allow users to login with their secret key. Any of the services could potentially be hacked and the user would have no way of knowing who was responsible for their loss of funds. It's a tough trade-off to make and we want to find the right balance.

We're very happy to finally be approved in the App Store and we're looking forward to releasing the updated version with more features. If you try out the desktop version of our wallet you'll find a lot of these features are already built.

blockeq

We've updated our website - check out the new design: https://www.blockeq.com/

blockeq

Build Challenge & New Logo Update:

In addition to the above new features we are looking to tackle the concept of a peer to peer wallet, one of the cornerstone projects listed for Stellar's 7th Build Challenge.

Also, we have a new logo! We feel that this professionally designed logo is more unique and polished. Let us know what you think ?

blockeq

We have some new features we are excited to share with you!

Contact Address Book Integration (iOS):

Tired of scanning QR codes or copying and pasting addresses when sending payments? We've added a new feature for iOS that allows you to add Stellar addresses for your contacts so you can easily search for them when sending payments.

BlockPoints (PTS) Token & Bounties:

We’ve created a token to incentivize contributions to our open source wallets by issuing bounties on GitHub. We now have 6 outside contributors who have completed or are currently working on bounties in exchange for our PTS token. A great example of this can be seen on our android wallet github page:

https://github.com/Block-Equity/stellar-android-wallet/issues?utf8=%E2%9C%93&q=is%3Aissue

TouchID & FaceID (iOS):

You can now log in to your mobile wallet using touchID or faceID rather than using your 4 digit PIN to access your account. This new feature will help make the experience of using our iOS wallet faster and easier.

Peer to Peer Wallet (Beta Concept):

We started developing a Beta version of a peer to peer wallet. The concept allows you to create your own token as an IOU (ex: YourName-XLM). Users can then add each other as peers by scanning their QR code, which contains their IOU asset code and address. A trust line is then established to each others IOU token. Users can then set a credit limit of how much XLM they trust their peer to borrow. This creates an offer exchanging XLM for their peer's IOU. Once users have set a credit limit they can each borrow from each other and pay back by trading the IOU token with XLM. This concept is a Beta version but allows users to keep track of debts and pay them back using trades on the SDEX. Since it is a beta version, we have opened a testflight typeform on which you can submit your email address to get access to the build:

https://blockeq.typeform.com/to/w84DR6

You can also follow the progress on this branch:

https://github.com/Block-Equity/stellar-ios-wallet/tree/p2p-wallet

satbam

Here is a link to a video that shows how the address book integration works:
https://twitter.com/sbambra/status/1030549274684207105

willd

Can you explain more about how the PTS bounties work? Also token details ...

blockeq

willd

Here is a link to the PTS token for more details:
https://stellar.expert/explorer/public/asset/PTS-GBPG7KRYC3PTKHBXQGRD3GMZ5DB4C3D553ZN2ZLH57LBAQIULVY46Z5F

From time to time we post bounties on GitHub (here are two examples):
https://github.com/Block-Equity/stellar-ios-wallet/issues/35
https://github.com/Block-Equity/stellar-ios-wallet/issues/30

Wahid

Hi,
I added my custom assets XSP- GAXAEHJTIO4UONW6C73YZVEZSK4DQ5EZGGJH4KHDSXTF5WDGCNOEDAVN but I don't see my asset logo.
How can I add this image?
Kind regards.

dzham

Wahid

you need a stellar.toml file

Wahid

Hi, thank you for your reply.
My stellar toml is here https://shoops.io/.well-known/stellar.toml
Can you take a look please, and tell me if is there any think wrong ?
Many thanks.

dzham

Wahid

What was wrong at the time you asked the question was that your server gave a 502 response.

sui77

Check your stellar.toml here: https://stellar.sui.li/toml-check/shoops.io
(you have SSL issues)